Extenders, Baluns, Signal Boosters

AT-AVGA-SR Atlona VGA with Stereo Audio Extender Wall Plate Kit up to 100ft

Atlona Powerless VGA with Stereo Audio Extenders over Cat5/6 up to 100ft. Model: AT-AVGA-SR
The Atlona AT-AVGA-SR (Sender and Receiver) VGA Extender Wall Plate Kit with stereo audio allow users to extend VGA and stereo audio signal great distances. Using a dual, cost effective Cat-5 or Cat-6 cables, these units extend signal at distances up 125ft with no signal degradation and high resolutions up to 1280x1024. Both transmitter and receiver units are completely Powerless.
Connection: The sender unit (AT-AVGA-S) is connected to the signal source and is then connected to the receiver unit (AT-AVGA-R) via 2 x Cat-5 or Cat-6 Cables. The receiver unit is then connected to the desired computer displays.
Package Includes:

1 x AT-AVGA-S Sender Unit
1 x AT-AVGA-R Receiver Unit
1 x user's manual
1 x VGA 4ft cable (Male to Male)
1 x Audio 4ft cable
2 x White Decora Plates
4 x Screws

*THIS UNIT DOES NOT WORK WITH TVíS, PC MONITORS ONLY!

$109.99

Channel Master CM 94444 High Performance Outdoor Balun Matching Transformer

The Channel Master CM 94444 outdoor matching transformer Balun is used to connect your 75ohm coaxial cable to the common 300 twin syle connection on most outdoor antennas. The CM 94444 is an industry standard balun which offers excellent matching and lowest through loss.

$2.20

Calrad 40-1097 Wireless HDMI Video Transmitter

Calrad 40-1097 Wireless HDMI Video Transmitter
Wireless 1080p HDMI System
This Wireless HDMI system delivers a plug-and-play method of extending HD audio/video wirelessly up to 30 meters in distance, with a perfect replication of high definition video and full digital and analog audio support for connecting HDTV sources. Featuring a performance unimpeded by line-of-sight operations, source signals are capable of transmitting through walls to accommodate multiple room installations. Wireless transmission speeds are achieved up to 300 Mbps, supporting even the most stringent demands of HD video. Built-in IR repeater system with IR receiver, IR emitter included.

$519.00

60.0MP BLACK Flat Mounting Plate

60.0MP BLACK Flat Mounting Plate

Standard mounting plate used with a variety of OmniMount products

$15.95

60.0CA WHITE Ceiling-Back

60.0CA WHITE Ceiling-BackCeiling-Back – White

CA mounts are designed to attach to the back of an enclosure, then to the ceiling or any other horizontal surface. With the accessories offered, the mount can be used almost anywhere and will provide 360° of horizontal coverage and up to 90° of vertical coverage.

$99.95

60.0CA BLACK Ceiling-Back

60.0CA BLACK Ceiling-Back

$99.95

60.0MP WHITE Flat Mounting Plate

60.0MP WHITE Flat Mounting Plate

Standard mounting plate used with a variety of OmniMount products

$15.95

60.0 C CLAMP –Silver

60.0 C Clamp –Silver

The C-Clamp Adapters provide a specialized solution for affixing OmniMount supported devices to a horizontal tubular structure, such as a truss or theatrical lighting grid.

$39.99

60.0PA WHITE Omni to NPT Pipe

60.0PA WHITE Omni to NPT Pipe

Extends ballshaft length using standard pipe available at hardware or plumbing supply stores

$10.95

60.0ST-MP BLK Ceiling/Wall/Floor-Top/Side/Bottom – Black

60.0ST-MP BLK Ceiling/Wall/Floor-Top/Side/Bottom – Black

The ST mounts are the most flexible of the professional OmniMounts and are truly considered problem solvers. If the enclosure is strong enough, ST mounts can be attached to any surface and provide a strong, flexible mount to provide coverage under the most challenging circumstances.

$85.95