DVI Extenders

AT-DVI4-100SR Atlona DVI +RS232+Bi-Directional IR Extenders over CAT5/6/7 up to 330ft (TRANSMITTER AND RECEIVER INCLUDED)

ATLONA 350ft DVI EXTENDER KIT with Bi-DIRECTIONAL IR, RS232 and ETHERNET PASS-THROUGH OVER SINGLE CAT5/6/7. 

MODEL AT-DVI4-100SR

The Atlona AT-DVI4-100SR is a DVI over single Cat 5, 6 or 7 transmitter and receiver set which allows 350ft of uncompressed video up to 1080p @ 48bit or 2Kx1K. It supports Bi-Directional RS-232, Bi-Directional IR and Bi-Directional Ethernet. The Atlona AT-DVI4-100SR is a perfect solution for extending any DVI source such as a Computer, Video Codec, Matrix Switcher, or any other from a remote location to your display.

The AT-DVI4-100SR is designed on HDBaseT technology.

Applications:

  • 2K Cinema Projectors
  • Medical Displays, extending X-Ray machines or measuring machines to high resolution DVI displays
  • Broadcast Studious, maintains the most perfect video quality over long distances. Better quality video than 20ft DVI cable

OPTIONAL POWER OVER USB NOW AVAILABLE FOR THIS ITEM!! AT-PWUSB-L

Key Features:

  • Extends DVI transmission up to 350ft (100m) with resolution up to 4kx2k (4 times the 1080p)  
  • HDBaseT technology allows full uncompressed 48bit video, Bi-Directional RS-232, Ethernet and IR, plus Video (4k x 2k which is 4 times 1080p) over a single Cat5/6/7
  • Ethernet pass-through, perfect for displays with on board applications such as Pandora and Netflix. This feature extends the Ethernet signal from a remote location to another room thus eliminating the need for an additional dedicated cable run.
  • Fully HDCP and EDID compliant
  • Supports all Vesa formats. Utilized with specialized projectors or commercial LCD panels
  • Supports refresh rates: 24Hz, 30Hz, 50Hz, 60Hz
  • Supports Bi-Directional IR: Perfect for use with control manufactures such as Control4 and RTI solutions
  • Supports Bi-Directional RS-232 pass-through: Control solutions such as AMX, Crestron and Control4 benefit from this feature as Video/Audio and RS-232 are extended over a single Cat 5/6/7 cable up to 350ft

Note: Looking for the same quality in HDMI, please look at AT-HD4-V110SR

Technical Specifications:

  • Transmitter Input: DVI-D, Ethernet (RJ45), IR (1/8 inch) RS-232 (DB9)
  • Transmitter Output: Link to Receiver (RJ45) IR (1/8 inch), Ethernet (RJ45)
  • Receiver Input: Link to Transmitter (RJ45), Ethernet (RJ45), IR (1/8 inch)
  • Receiver Output: DVI-D, Ethernet (RJ45), IR (1/8 inch), RS-232 (DB9)
  • HDCP/EDID Compliant: Yes
  • Resolution Support: Up to 2k x 1k (2048x1080p) - single link
  • Single Link Only
  • Supports all Vesa formats
  • Deep Color Support: 48bit up to 350ft
  • Extends DVI transmission up to 350ft with resolution up to 2kx1k
  • Supports Bi-Directional IR
  • Dimensions: 5.98 x 4.13 x 1.22 (L x W x H) 151.8 x 104.9 x 30.9mm
  • Weight: 2.1lbs (transmitter and receiver) 0.95kg
  • Power Supply: 2 x 5V 4A DC  (universal 110/220v) Locking type

Package Includes:

  • 1 x AT-DVI4-100SR transmitter/receiver kit
  • 2 x 5v/4a DC (universal 110/220v) Locking type
  • 1 x set of wall mount brackets
  • 2 x emitter sensor
  • 2 x receiver sensor
  • 1 x instruction manual

Warranty:

  • 3 year parts and labor
$659.68
 
Same Day Shipping
On Orders Placed in the Next
6 Hours 12 Minutes
$659.68

AT-DVIDF40SR DVI Dual Link Extenders over 2 x Multi-Mode Fiber 1200ft (TRANSMITTER ONLY)

Atlona DVI Dual Link Extenders over 2 x Multi Mode Fiber up to 1000ft @ 2560x1600. (Transmitter and Receiver are included). Model: AT-DVIDF40SR


The Atlona AT-DVIDF40SR is a DVI Dual Link Extenders Kit allows uncompressed high resolution video up to 2560x1600 to be transferred up to 1000ft away over 2 x SC Multi-Mode Fiber Cables. The DVIDF40SR transmitter and receiver modules are featured with EDID and DDC channels pass-through, which is a requirement for many video cards in order to display highest resolutions such as 2560x1600. Plug and Play, no configuration is required.

Extenders had been tested and certified with major brands of 2K Cinema Projectors, 30-inch Apple/Dell/HP monitors and Medical Displays.

Note: Dual Link DVI Cables are required from source to the transmitter and from the display to the receiver.

Features:

  • Extra Long Distance Extension up to 1000ft @2560x1600 (WQXGA)
  • Dual Link DVI and EDID/DDC over 2 x Multi-Mode SC Fiber Cables
  • EDID, user will not have to deal with learning EDID
  • HDCP Compliant
  • Uncompressed Video
  • UL Class A Certified, required by high class government and medical installations
  • Built in Equalizer, allows user to use modules in between switchers/splitters and other equipment of that sort
  • Wall Mountable, brackets are included
  • Perfect for Commercial, Government and medical Installations or for high-end residential.
  • Made in USA

Technical Specifications:

  • Resolution Support: up to 2560x1600 (WQXGA) up to 1000ft
  • EDID/DDC: Fully bi-directional communication
  • HDCP: 2.0
  • DVI Connector: 24+1pin female (DVI-D Digital Only)
  • Fiber Connector: 2 x Multi-Mode SC style
  • Hot Plug: Fully Supports
  • Power:  5V/1A
  • Weight (LB): 0.45
  • Dimensions (Inch): 0.75 x 2.75 x 3.0

Package Includes:

  • 1 x AT-DVIDF40SR (Transmitter and Receiver are included)
  • 1 x Instructions Manual
  • 2 x 5V/1A Power Supply
  • 4 x Wall Brackets

 
Warranty:
3 years parts and labor

$2,859.71
 
Same Day Shipping
On Orders Placed in the Next
6 Hours 12 Minutes
$2,859.71

AT-DVIF30R-IR DVI with Bi-directional (RS232, Audio) and IR over multi mode fiber 1200ft (RECEIVER ONLY)

Atlona DVI, RS232, IR and Audio Receiver module over a single Multi Mode Fiber with HDCP and EDID Support. Model: AT-DVIF30R-IR


The Atlona AT-DVIF30R-IR is an DVI with RS232, IR and Audio receiver module with a single fiber optics input (multi-mode) and DVI, RS232, IR and Audio female outputs. The AT-DVIF30R-IR is designed to work with multiple transmitter modules:

  • AT-DVIF30S-IR - Box Style DVI Receiver module with DVI, RS232, IR and Audio inputs
  • AT-HDF30S-IR – Box Style DVI Transmitter module with DVI, RS232, IR and Audio inputs
  •  AT-RGBF30S-IR - Box Style VGA/Component Receiver module with VGA ot Component, RS232, IR and Audio inputs

Features:

  • Extra Long Distance Extension up to 1200ft @1080p or 1920x1200, 1500ft @ 1600x1200 and 4000ft @ 1280x1024 
  • EDID and HDCP Support, user will not have to deal with learning EDID
  • High Resolution Video, EDID, HDCP, RS232, IR and AUX Audio can be handled through a single fiber cable
  • RS232 Compatible
  • IR pass through from the receiver module to the transmitter module
  • Interchangeable with variety of receiver modules whether wall plate, box or miniature style (HDMI or DVI)
  • UL Class A Certified, required by high class government and medical installations
  • Built in Equalizer, allows user to use modules in between switchers/splitters and other equipment of that sort
  • Perfect for Commercial, Government and medical Installations or for high-end residential.
  • Made in USA

Technical Specifications:

  • Resolution Support: up to 1080p or 1920x1200
  • HDCP:  Fully Supports
  • EDID/DDC: Fully bi-directional communication
  • DVI Connector: 24+1pin female (DVI-D Digital Only)
  • RS232 Connector: harness style
  • AUX Audio connector: harness style
  • IR Connector: 3.5mm jack to be used with IR emitters up to 38kHz
  • Fiber Connector: Single Multi-Mode SC style
  • Hot Plug: Fully Supports
  • Power:  5V/1A
  • Weight (LB): 0.45

Package Includes:

  • 1 x AT-DVIF30R-IR
  • 1 x Instructions Manual
  • Harness Style Adapter for RS232 and Audio
  • 1 x 5V/1A Power Supply

 
Warranty:
3 years parts and labor

$1,209.41
 
Same Day Shipping
On Orders Placed in the Next
6 Hours 12 Minutes
$1,209.41

AT-DVIF30S-IR DVI with Bi-directional (RS232, Audio) and IR over multi mode fiber 1200ft (TRANSMITTER ONLY)

Atlona DVI, RS232, IR and Audio Transmitter module over a single Multi Mode Fiber with HDCP and EDID Support. Model: AT-DVIF30S-IR


The Atlona AT-DVIF30S-IR is a DVI with RS232, IR and Audio transmitter module with an DVI, RS232, IR and Audio female inputs and a single fiber optics output (multi-mode). The AT-DVIF30S-IR is designed to work with multiple receiver modules:

  • AT-DVIF30R-IR - Box Style DVI Receiver module with DVI, RS232, IR and Audio outputs
  • AT-HDF30R-IR – Box Style HDMI Receiver module with HDMI, RS232, IR and Audio outputs

Features:

  • Extra Long Distance Extension up to 1200ft @1080p or 1920x1200, 1500ft @ 1600x1200 and 4000ft @ 1280x1024 
  • EDID and HDCP Support, user will not have to deal with learning EDID
  • High Resolution Video, EDID, HDCP, RS232, IR and AUX Audio can be handled through a single fiber cable
  • RS232 Compatible
  • IR pass through from the receiver module to the transmitter module
  • Interchangeable with variety of receiver modules whether wall plate, box or miniature style (HDMI or DVI)
  • UL Class A Certified, required by high class government and medical installations
  • Built in Equalizer, allows user to use modules in between switchers/splitters and other equipment of that sort
  • Perfect for Commercial, Government and medical Installations or for high-end residential.
  • Made in USA

Technical Specifications:

  • Resolution Support: up to 1080p or 1920x1200
  • HDCP:  Fully Supports
  • EDID/DDC: Fully bi-directional communication
  • DVI Connector: DVI 24+1 (DVI Digital Only)
  • RS232 Connector: harness style
  • AUX Audio connector: harness style
  • IR Connector: 3.5mm jack to be used with IR emitters up to 38kHz
  • Fiber Connector: Single Multi-Mode SC style
  • Hot Plug: Fully Supports
  • Power:  5V/1A
  • Weight (LB): 0.45

Package Includes:

  • 1 x AT-DVIF30S-IR
  • 1 x Instructions Manual
  • Harness Style Adapter for RS232 and Audio
  • 1 x 5V/1A Power Supply

 
Warranty:
3 years parts and labor

$1,209.41
 
Same Day Shipping
On Orders Placed in the Next
6 Hours 12 Minutes
$1,209.41

AT-DVIFW10R DVI Wall Plates over Fiber up to 1200ft (RECEIVER ONLY)

Atlona Wall Plate Style DVI Receiver over single Multi Mode Fiber with HDCP and EDID Support. Model: AT-DVIFW10R


The Atlona AT-DVIFW10R is a Wall Plate Style DVI receiver module with a single fiber optics input (multi-mode) and DVI output. The AT-DVIFW10R is designed to work with multiple transmitter modules:

  • AT-DVIF20S - Miniature DVI Transmitter module with DVI Male input and single Fiber output
  • AT-DVIFW10S - Wall Plate style DVI Transmitter module with DVI input and single Fiber output
  • AT-HDF20S – Miniature HDMI Transmitter module with HDMI Male input and single Fiber output
  • AT-HDFW10S – Wall Plate style HDMI Transmitter module with HDMI input and single Fiber output

Features:

  • Extra Long Distance Extension up to 1200ft @1080p or 1920x1200, 1500ft @ 1600x1200 and 4000ft @ 1280x1024 
  • EDID and HDCP Support, user will not have to deal with learning EDID
  • High Resolution Video, EDID and HDCP can be handled through a single fiber cable
  • Interchangeable with variety of receiver modules whether wall plate, box or miniature style (DVI or HDMI)
  • UL Class A Certified, required by high class government and medical installations
  • Built in Equalizer, allows user to use modules in between switchers/splitters and other equipment of that sort
  • In-Wall 12V external power supply
  • Perfect for Commercial, Government and medical Installations or for high-end residential.
  • Made in USA

Note: The DVI Module is only able to pass Digital Signals (DVI-D),it can’t be used with DVI/VGA adapters.

Technical Specifications:

  • Resolution Support: up to 1080p or 1920x1200
  • HDCP:  Fully Supports
  • EDID/DDC: Fully bi-directional communication
  • DVI Connector: 24+1 pin (DVI-D) male
  • Fiber Connector: Single Multi-Mode SC style
  • Hot Plug: Fully Supports
  • Power:  Supports In-Wall 12V power
  • Wall Plate Style: Metal Single Gang compatible
  • Weight (LB): 0.3

Package Includes:

  • 1 x AT-DVIFW10R
  • 1 x Instructions Manual

Warranty:
3 years parts and labor

$725.64
 
Same Day Shipping
On Orders Placed in the Next
6 Hours 12 Minutes
$725.64

AT-DVIFW10S DVI Wall Plates over Fiber up to 1200ft (TRANSMITTER ONLY)

Atlona Wall Plate Style DVI Transmitter over single Multi Mode Fiber with HDCP and EDID Support. Model: AT-DVIFW10S


The Atlona AT-DVIFW10S is a Wall Plate Style DVI transmitter module with a DVI female input and a single fiber optics output (multi-mode). The AT-DVIFW10S is designed to work with multiple receiver modules:

  • AT-DVIF20R - Miniature DVI Receiver module with single Fiber input and DVI Male output.
  • AT-DVIFW10R - Wall Plate style DVI Receiver module with single Fiber input and DVI output
  • AT-HDF20R – Miniature HDMI Receiver module with single Fiber input and HDMI Male output
  • AT-HDFW10R – Wall Plate style HDMI Receiver module with single Fiber input and HDMI output

Features:

  • Extra Long Distance Extension up to 1200ft @1080p or 1920x1200, 1500ft @ 1600x1200 and 4000ft @ 1280x1024 
  • EDID and HDCP Support, user will not have to deal with learning EDID
  • High Resolution Video, EDID and HDCP can be handled through a single fiber cable
  • Interchangeable with variety of receiver modules whether wall plate, box or miniature style (DVI or HDMI)
  • UL Class A Certified, required by high class government and medical installations
  • Built in Equalizer, allows user to use modules in between switchers/splitters and other equipment of that sort
  • In-wall 12V external power supply
  • Perfect for Commercial, Government and medical Installations or for high-end residential.
  • Made in USA

Note: The DVI Module is only able to pass Digital Signals (DVI-D),it can’t be used with DVI/VGA adapters.

Technical Specifications:

  • Resolution Support: up to 1080p or 1920x1200
  • HDCP:  Fully Supports
  • EDID/DDC: Fully bi-directional communication
  • DVI Connector: 24+1 pin (DVI-D) male
  • Fiber Connector: Single Multi-Mode SC style
  • Hot Plug: Fully Supports
  • Power:  Supports In-Wall 12V power
  • Wall Plate Style: Metal Single Gang compatible
  • Weight (LB): 0.3

Package Includes:

  • 1 x AT-DVIFW10S
  • 1 x Instructions Manual

Warranty:
3 years parts and labor

$846.57
 
Same Day Shipping
On Orders Placed in the Next
6 Hours 12 Minutes
$846.57

AT-DVIF20R Miniature DVI Extender over Multi Mode fiber up to 1200ft (HDCP/EDID) (RECEIVER ONLY)

Atlona miniature DVI Receiver over single Multi Mode Fiber with HDCP and EDID Support. Model: AT-DVIF20R


The Atlona AT-DVIF20R is a DVI Receiver module with a single fiber optics input (multi-mode) and DVI male output. The AT-DVIF20R is designed to work with multiple transmitter modules:

  • AT-DVIF20S - Miniature DVI Transmitter module with DVI Male input and single Fiber output
  • AT-DVIFW10S - Wall Plate style DVI Transmitter module with DVI input and single Fiber output
  • AT-HDF20S – Miniature HDMI Transmitter module with HDMI Male input and single Fiber output
  • AT-HDFW10S – Wall Plate style HDMI Transmitter module with HDMI input and single Fiber output

Features:

  • Extra Long Distance Extension up to 1200ft @1080p or 1920x1200, 1500ft @ 1600x1200 and 4000ft @ 1280x1024 
  • EDID and HDCP Support, user will not have to deal with learning EDID
  • High Resolution Video, EDID and HDCP can be handled through a single fiber cable
  • Interchangeable with variety of receiver modules whether wall plate, box or miniature style (DVI or HDMI)
  • UL Class A Certified, required by high class government and medical installations
  • Built in Equalizer, allows user to use modules in between switchers/splitters and other equipment of that sort
  • Perfect for Commercial, Government and medical Installations or for high-end residential.
  • Made in USA

Note: The DVI Module is only able to pass Digital Signals (DVI-D),it can’t be used with DVI/VGA adapters.

Technical Specifications:

  • Resolution Support: up to 1080p or 1920x1200
  • HDCP:  Fully Supports
  • EDID/DDC: Fully bi-directional communication
  • DVI Connector: 24+1 pin (DVI-D) male
  • Fiber Connector: Single Multi-Mode SC style
  • Hot Plug: Fully Supports
  • Power: 5V/1A (most devices will be able to power up the module through 5V embedded on the DVI connector
  • Weight (LB): 0.1

Package Includes:

  • 1 x AT-DVIF20R
  • 1 x Instructions Manual
  • 1 x 5V/1A Power Supply

 
Warranty:
3 years parts and labor

$659.68
 
Same Day Shipping
On Orders Placed in the Next
6 Hours 12 Minutes
$659.68

AT-DVIF20S Miniature DVI Extender over Multi Mode fiber up to 1200ft (HDCP/EDID) (TRANSMITTER ONLY)

Atlona miniature DVI Transmitter over single Multi Mode Fiber with HDCP and EDID Support. Model: AT-DVIF20S


The Atlona AT-DVIF20S is a DVI transmitter module with a DVI male input and a single fiber optics output (multi-mode). The AT-DVIF20S is designed to work with multiple receiver modules:

  • AT-DVIF20R - Miniature DVI Receiver module with single Fiber input and DVI Male output.
  • AT-DVIFW10R - Wall Plate style DVI Receiver module with single Fiber input and DVI output
  • AT-HDF20R – Miniature HDMI Receiver module with single Fiber input and HDMI Male output
  • AT-HDFW10R – Wall Plate style HDMI Receiver module with single Fiber input and HDMI output

Features:

  • Extra Long Distance Extension up to 1200ft @1080p or 1920x1200, 1500ft @ 1600x1200 and 4000ft @ 1280x1024 
  • EDID and HDCP Support, user will not have to deal with learning EDID
  • High Resolution Video, EDID and HDCP can be handled through a single fiber cable
  • Interchangeable with variety of receiver modules whether wall plate, box or miniature style (DVI or HDMI)
  • UL Class A Certified, required by high class government and medical installations
  • Built in Equalizer, allows user to use modules in between switchers/splitters and other equipment of that sort
  • Perfect for Commercial, Government and medical Installations or for high-end residential.
  • Made in USA

Note: The DVI Module is only able to pass Digital Signals (DVI-D),it can’t be used with DVI/VGA adapters.

Technical Specifications:

  • Resolution Support: up to 1080p or 1920x1200
  • HDCP:  Fully Supports
  • EDID/DDC: Fully bi-directional communication
  • DVI Connector: 24+1 pin (DVI-D) male
  • Fiber Connector: Single Multi-Mode SC style
  • Hot Plug: Fully Supports
  • Power: 5V/1A (most devices will be able to power up the module through 5V embedded on the DVI connector
  • Weight (LB): 0.1

Package Includes:

  • 1 x AT-DVIF20S
  • 1 x Instructions Manual
  • 1 x 5V/1A Power Supply

 
Warranty:
3 years parts and labor

$769.60
 
Same Day Shipping
On Orders Placed in the Next
6 Hours 12 Minutes
$769.60

AT-DVI60SRS Atlona Powerless DVI Extender up to 160ft @ 1920x1200(SENDER AND RECEIVER INCLUDED)

Atlona Passive DVI Extenders Over single Cat5/6/7 (Transmitter and Receiver are included). Model: AT-DVI60SRS

The AT-DVI60SRS is a DVI Passive Extender kit that allows to extend high resolution DVI digital signals great distances. The DVI60SRS can transmit resolution such as 1920x1200 up to 160ft away or 1024x768 up to 180ft. With AT-DVI60SRS, users can send high quality digital video from DVI enabled PC/Laptop through single cost effective Cat5, Cat6 or Cat7 cable to the remote monitor or projector, instead of using short and expensive DVI cables.

The AT-DVI60SRS includes one transmitter and one receiver units. The transmitting unit is connected to your PC DVI output and the receiving unit is connected to the monitor or projector. The transmission distance between the transmitting and receiving units can be up to 50m (160ft) at resolutions up to 1920x1200 or 55m (180ft) at resolutions up to 1024x768. With compact size and requiring no power, AT-DVI60SRS is the most cost effective choice for bringing your impressive digital video to the remote display.

Features:

  • DVI 1.1 compliant
  • Extend the transmission length 50m (160ft) at resolutions up to 1920x1200 or 55m (180ft) at resolutions up to 1024x768
  • Easy to install
  • No power required (passive)
  • Compact size
  • Direct plug-in
  • Capable of using CAT5/6/7 (568B Termination for optimal results)
  • Network Traffic LEDS (denotes active network traffic)

Tech Spec:

  • Role of usage: Transmitter [TX] Receiver [RX]
  • DVI compliance: DVI 1.1
  • HDCP compliance: No
  • Video bandwidth Single-link: 165MHz [4.95Gbps]
  • Video support Up to WUXGA: [1920x1200@60Hz]
  • DVI over CAT5e transmission: 1920x1200@60Hz – 50m [160ft]
  • 1024x768@60Hz – 55m [180ft]
  • Audio support: No audio for DVI signal
  • Equalization: None
  • Input TMDS signal: 1.2 Volts [peak-to-peak]
  • Input DDC signal 5 Volts: [peak-to-peak, TTL] from DVI output
  • Input: 1 x DVI 1x RJ-45
  • Output: 1x RJ-45 1 x DVI
  • DVI connector: DVI-I [29-pin male digital only]
  • RJ-45 connector: WE/SS 8P8C with 2 LED indicators

Package Includes:

  • 1 x Transmitter Module
  • 1 x Receiver Module
  • 1 x Instructions Manual

Warranty:

3 years parts and labor

$219.89
 
Same Day Shipping
On Orders Placed in the Next
6 Hours 12 Minutes
$219.89

AT-DVI15SRS DVI Passive Single CAT5 Extender

Atlona DVI Passive Extender over Single Cat5 up to 100ft. Model: AT-DVI15SRS

The Atlona AT-DVI15SRS is a perfect solution for those who need to extend DVI signal over long distance, over single cat5 or cat6. The Atlona DVI Extenders can handle any resolution up to 1280x1024 at up to 100ft and 1920x1200 up to 50ft. Atlona is the only company that has DVI balun system which is using a single cat5 or cat6 wire at this time.

The installation of the Atlona DVI Over CAT5 is quick and easy, simply attach Sender unit to your DVI source such as a Computer, attach the Receiver unit to your display, then connect 1 x Cat5 or Cat6 cable and you are done. The signal will be sent with perfect video quality. We do recommend to use shielded cat5 or cat6 wire to get the best quality signal.

Key Features:

  • Perfect video quality up to 1920x1200 up to 50ft and up to 1280x1024 up to 100ft
  • Supports CAT-5/CAT-5E/CAT-6 cables of variable types.
  • Supports high definition resolutions up to 1080P or 1920x1200
  • Easy to install and simple to operate.

Technical Specifications:

  • Video Bandwidth: 1.65 Gbps (DVI 1.1)
  • Resolutions: 1920x1200 (up to 50ft ) and 1280x1024 (up to 100ft)
  • Input TMDS signal: 1.2 volts (peak-to-peak)
  • Input DDC signal: 5 volts (peak-to-peak)
  • DVI Connector: DVI-D (Digital Only)
  • RJ-45 Connector: 2 indication LEDs
  • Dimensions: 50mm x 40mm x 20mm / 2”x1.6”x0.8” (L x W x H)
  • Weight: 0.1lb each unit

Package Includes:

  • One AT-DVI15SRS ( sender and receiver units )
  • One Users manual

Warranty:

3 year manufacture warranty (parts&labor)

$109.92
 
Same Day Shipping
On Orders Placed in the Next
6 Hours 12 Minutes
$109.92