DVI Switchers

AT-DVI-81A Atlona 8x1 DVI-D switch with Stereo Audio

ATLONA 8x1 DVI SWITCHER WITH STEREO AUDIO

MODEL: AT-DVI-81A

The Atlona AT-DVI-81A is a 8 input to 1 output DVI switcher with stereo audio. The switcher is designed to route up to 8 DVI sources with audio to a single display. The AT-DVI-81A is capable of passing extremely high resolutions up to 1920x1200 or 1080p. Each input is featured with a built-in repeater which will help to keep the original signal integrity. The DVI switcher is fully HDCP compliant, therefore it can be used along with HDMI sources. DVI/HDMI adapters or cables will be required. The Atlona 8x1 DVI Switcher could be controlled through IR remote, RS232 or manually via button selection on the front panel of the switcher.

Note: For applications where a customer would need the computer to sense a monitor at all times, even when the switcher is switched to a different computer, we recommend using our EDID Recorder, AT-DVISync. The user would require 1 x DVISync per computer.

Key Features:

  • The Atlona AT-DVI-81A is designed to switch up to 8 computers to 1 monitor.
  • Switcher is featured with 8 Stereo audio inputs and 1 Output
  • Switcher is able to support high resolutions up to 1920x1200 (WUXGA) or 1080p (1920x1080)
  • Fully HDCP compliant and therefore can also work with HDMI sources (DVI/HDMI adapters required)
  • High Bandwidth Support up to 6.75Gbps allows high motion video and high resolutions to be passed through without any delay or degradation
  • Ideal for home theater integration or commercial use
  • Supports wide range of Computer resolutions from VGA to WUXGA (640x480 ~ 1920x1200)
  • HDTV resolutions: 480i/480p, 576i/576p, 720p, 1080i & 1080p (50/60Hz)
  • Switcher is compatible with all DVI enabled computers and monitors (DVI output has to be digital only)
  • Supports Digital Video TMDS formats in Deep Color up to 36bits
  • IR input jack, allows users to extend IR signal up to 1000ft from the switch
  • Various control Options: IR, RS232 and Manual Push Button on the front panel
  • Rack Mountable, comes with a set of rack ears – 1U

Technical Specifications:

  • Type of Switcher: 8 input to 1 output DVI with Stereo Audio Switch
  • DVI Input: DVI-I (Digital Only)
  • Stereo Audio Input: 1/8-inch (3.5mm)
  • Supported Resolutions: up to 1920x1200 or 1080p
  • HDCP & EDID Compliant
  • Input Signals: Video (TMDS) 0.5~1.0Vpp, DDC 5Vpp
  • Various video input interface supporting digital video standards
    • RGB/YCbCr: 24/30/36-bits
    • YCbCr: 8/10/12/16/20/24-bits
    • Double data rate interface for RGB/YCbCr: 12/15/18-bits
  • Various control options: IR, RS232 and Manual Push Button on the front panel
  • Data Rates: 250Mbps to 6.75Gbps
  • Infrared Frequency: 38 KHz
  • Safety Approvals: CE, FCC, RoHs (2002/95/EC)
  • Dimensions (LWH): 19”x 7.87” x 1.75”(482mm x 200mm x 44mm) – 1U
  • Power Supply: DC12V / 1.25A (110~240V)
  • Shipping Weight: 5.80 lb

Package Includes:

  • AT-DVI-81A (8x1 DVI Switch with Stereo Audio)
  • Operation Manual
  • IR Remote Control
  • 19 inch Rack Ears - 1U
  • IR Extender allows user to connect an IR extension cable to the switcher and control the switch from up to 1000ft away.
  • RS232 Cable
  • Power Supply 12VDC, Universal Type 50/60Hz, 100~230 VAC
$659.68
 
Same Day Shipping
On Orders Placed in the Next
6 Hours 11 Minutes
$659.68

AT-DVI-41A Atlona 4x1 DVI-D switch with Stereo Audio

ATLONA 4x1 DVI SWITCHER WITH STEREO AUDIO

MODEL: AT-DVI-41A

The Atlona AT-DVI-41A is a 4 input to 1 output DVI switcher with stereo audio. The switcher is designed to route up to 4 DVI sources with audio to a single display. The AT-DVI-41A is capable of passing extremely high resolutions up to 1920x1200 or 1080p. Each input is featured with a built-in repeater which will help to keep the original signal integrity. The DVI switcher is fully HDCP compliant, therefore it can be used along with HDMI sources. DVI/HDMI adapters or cables will be required. The Atlona 4x1 DVI Switcher could be controlled through IR remote, RS232 or manually via button selection on the front panel of the switcher.

Note: For applications where a customer would need the computer to sense a monitor at all times, even when the switcher is switched to a different computer, we recommend using our EDID Recorder, AT-DVISync. The user would require 1 x DVISync per computer.

Key Features:

  • The Atlona AT-DVI-41A is designed to switch up to 4 computers to 1 monitor.
  • Switcher is featured with 4 Stereo audio inputs and 1 Output
  • Switcher is able to support high resolutions up to 1920x1200 (WUXGA) or 1080p (1920x1080)
  • Fully HDCP compliant and therefore can also work with HDMI sources (DVI/HDMI adapters required)
  • High Bandwidth Support up to 6.75Gbps allows high motion video and high resolutions to be passed through without any delay or degradation
  • Ideal for home theater integration or commercial use
  • Supports wide range of Computer resolutions from VGA to WUXGA (640x480 ~ 1920x1200)
  • HDTV resolutions: 480i/480p, 576i/576p, 720p, 1080i & 1080p (50/60Hz)
  • Switcher is compatible with all DVI enabled computers and monitors (DVI output has to be digital only)
  • Supports Digital Video TMDS formats in Deep Color up to 36bits
  • IR input jack, allows users to extend IR signal up to 1000ft from the switch
  • Various control Options: IR, RS232 and Manual Push Button on the front panel
  • Rack Mountable, comes with a set of rack ears – 1U

Technical Specifications:

  • Type of Switcher: 4 input to 1 output DVI with Stereo Audio Switch
  • DVI Input: DVI-I (Digital Only)
  • Stereo Audio Input: 1/8-inch (3.5mm)
  • Supported Resolutions: up to 1920x1200 or 1080p
  • HDCP & EDID Compliant
  • Input Signals: Video (TMDS) 0.5~1.0Vpp, DDC 5Vpp
  • Various video input interface supporting digital video standards
    • RGB/YCbCr: 24/30/36-bits
    • YCbCr: 8/10/12/16/20/24-bits
    • Double data rate interface for RGB/YCbCr: 12/15/18-bits
  • Various control options: IR, RS232 and Manual Push Button on the front panel
  • Data Rates: 250Mbps to 6.75Gbps
  • Infrared Frequency: 38 KHz
  • Safety Approvals: CE, FCC, RoHs (2002/95/EC)
  • Dimensions (LWH): 19”x 7.87” x 1.75”(482mm x 200mm x 44mm) – 1U
  • Power Supply: DC12V / 1.25A (110~240V)
  • Shipping Weight: 5.80 lb

Package Includes:

  • AT-DVI-41A (4x1 DVI Switch with Stereo Audio)
  • Operation Manual
  • IR Remote Control
  • 19 inch Rack Ears - 1U
  • IR Extender allows user to connect an IR extension cable to the switcher and control the switch from up to 1000ft away.
  • RS232 Cable
  • Power Supply 12VDC, Universal Type 50/60Hz, 100~230 VAC
$417.80
 
Same Day Shipping
On Orders Placed in the Next
6 Hours 11 Minutes
$417.80

AT-DVI0808 Atlona 8x8 DVI Matrix Switch (non-HDCP)

Atlona 8x8 Professional DVI Matrix Switch. Model: AT-DVI0808

The Atlona AT-DVI0808 is an 8 input 8 output Commercial DVI matrix switcher. The AT-DVI0808 is one of the world's advanced matrix switchers. It is capable of being controlled through IR Remote, RS232 or LAN via software included or via a third party control system. Switcher is designed to handle any resolution up to WUXGA (1920x1200) without any signal degradation. The Atlona DVI Switchers are featured with re-clocking technology which allows a use of long cables on the input and output sides.

Main Applications:

The Atlona DVI Matrix switchers are designed to be mainly used in broadcast room, multi council-chamber, television teaching room and command center.

Note: The AT-DVI0808 is not HDCP compliant.

Main Features:

  • Supports High-Resolution Video up to 1920x1200
  • Full EDID simulation and memory allows to save EDID data from the displays
  • Re-Clocking Technology allows for use of long cables on inputs and outputs of the switch
  • Power-Fail Protection, allows switcher to restore previous settings
  • LCD display, shows all programmed commands and switcher responses
  • Preset ability, allows user to save specific tasks under one of the 10 presets and call it back with shortcut
  • RS232 Communication Control Input, allows users to control switcher via included advanced Control software or Third Party Control System
  • TCP/IP Controlling with an optional accessory
  • IR Remote Control
  • Inputs: 8 x DVI female(Digital Only)
  • Outputs: 8 x DVI female (Digital Only)
  • Compatible Formats: DVI-D only
  • Lock Safe, allows users to lock unit from being accidentally switched to incorrect mode
  • Undo Function, allows user to undo the incorrect operation and return to the previous setting
  • Standard 19'' Rack Mount Size - 2U

Technical Specifications:

  • High Resolution Support: up to 1920x1200
  • Video Bandwidth: 165MHz
  • Clock Jitter: <0.15Tbit
  • Switching speed: 200 ns (Max)
  • Signal type: DVI-D
  • Standard 19'' Rack Mount Size -2U
  • Connector: DVI-D Female
  • Communication Port: RS232 and LAN
  • Temperature: 20C to +70C (-20 F to 158 F )
  • Humidity: 10% to 90%
  • Power Supply: 110V-240V (50-60Hz)
  • Dimensions (mm): W 485 X H 90 X D 260
  • Dimensions (inch): W 19 X H 3.54 X D 10.24
  • Unit Weight: 3.5kg or 7LB
  • Gross Package Weight: 10LB

Package Includes:

  • 1 x AT-DVI0808
  • 1 x RS-232 Communication Cord
  • 1 x Power Supply Cord (US)
  • 1 x CD with RS232 Application Software
  • 1 x IR Remote
  • 1 x User's Manual and Quality Guarantee

Warranty:

3 year manufactures warranty (parts and labor)

$4,837.68
 
Same Day Shipping
On Orders Placed in the Next
6 Hours 11 Minutes
$4,837.68