VGA Extenders

AT-WPVGA-SR VGA Wall Plate Extension KIT Over CAT5/6 up to 300FT (Passive)

Atlona Passive VGA Extender KIT up to 330ft over 1 x CAT5/6/7 Cable (Transmitter and Receiver). Model: AT-VGA100-SR

The Atlona passive VGA wall plate extender system allows sending a perfect video signal over 1 x CAT5/6/7 cable up to the distance of 330ft with resolutions up to 1280x1024. Plug and Play, no drivers or software needed, user will not even notice the difference when using an extender versus a direct connection. The extenders require no external power.

Applications:

The VGA Extenders are a great solution for many different applications, e.g., classroom, office environment, data-center, training room and many others where the computer must be placed further away from the users display.

Features:

  • Extend signals up to 330ft away from the computer on a single low-cost Cat5, 6 or 7 cables.
  • No power supplies are needed
  • Perfect for extending VGA signal further away than standard cables may allows.
  • Resolution support up to 1280x1024
  • Plug and Play, no drivers or software needed
  • Any computer is compatible, no limitations

Technical Specifications:

  • Transmitter Input: HD15 female
  • Transmitter Output: RJ45 female
  • Receiver Input: RJ45 female
  • Receiver Output: HD15 female
  • Supported Resolutions: 800x600, 1024x768, 1280x768 and 1280x1024
  • Transmission Distance: up to 330ft
  • Dimensions: Single Gang

Max. Distance via CAT5 Cable:

  • 640x480 pixels (15MHz) – 430ft
  • 800x600 pixels (30MHz) – 320ft
  • 1024x768 pixels (60MHz) – 250ft
  • 1280x1024 pixels (100MHz) – 200ft

Package Includes:

  • 1 x AT-VGA100-S - transmitter unit
  • 1 x AT-VGA100-R - receiver unit
  • 1 x Instructions Manual

Warranty: 3 years

$153.91
 
Same Day Shipping
On Orders Placed in the Next
5 Hours 44 Minutes
$153.91

AT-VGA100-R VGA Receiver Compatible With Wall Plate (WPVGA-S) & METAL Box Style (VGA100-S) Transmitters (Passive)

Atlona Passive VGA Extender up to 330ft over 1 x CAT5/6/7 Cable (RECEIVER ONLY). Model: AT-VGA100-R

The Atlona passive VGA receiver unit allows sending a perfect video signal over 1 x CAT5/6/7 cable up to the distance of 330ft with resolutions up to 1280x1024. These extenders can be mixed and matched with each other. The wall plate transmitter can be matched with “box” receiver and the other way around and of course, the wall plate transmitter will perfectly work with wall plate receiver and “box” transmitter with “box” receiver.

Plug and Play, no drivers or software needed, user will not even notice the difference when using an extender versus a direct connection. The extenders require no external power.

Note: The AT-VGA100-R is only a receiver unit, the transmitter is required (AT-WPVGA-S or AT-VGA100S)

Combinations are below:

a. AT-WPVGA-S + AT-WPVGA-R c. AT-WPVGA-S + AT-VGA100-R
b. AT-VGA100-S + AT-VGA100-R d. AT-VGA100-S + AT-WPVGA-R

 

Applications:

 

 

The VGA Extenders are a great solution for many different applications, e.g., classroom, office environment, data-center, training room and many others where the computer must be placed further away from the users display.

Features:

  • Extend signals up to 330ft away from the computer on a single low-cost Cat5, 6 or 7 cables.
  • No power supplies are needed
  • Perfect for extending VGA signal further away than standard cables may allows.
  • Wall plate transmitter is compatible with “box” receiver and other way around.
  • Resolution support up to 1280x1024
  • Plug and Play, no drivers or software needed
  • Any computer is compatible, no limitations

Technical Specifications:

  • Input: HD15 female
  • Output: RJ45 female
  • Supported Resolutions: 800x600, 1024x768, 1280x768 and 1280x1024
  • Transmission Distance: up to 330ft

Max. Distance via CAT5 Cable:

  • 640x480 pixels (15MHz) – 430ft
  • 800x600 pixels (30MHz) – 320ft
  • 1024x768 pixels (60MHz) – 250ft
  • 1280x1024 pixels (100MHz) – 200ft

Warranty: 3 years

$76.95
 
Same Day Shipping
On Orders Placed in the Next
5 Hours 44 Minutes
$76.95

AT-VGA100-S VGA Transmitter Compatible With Wall Plate (WPVGA-R) & Metal Box Style (VGA100-R) Receivers (Passive)

Atlona Passive VGA Extender up to 330ft over 1 x CAT5/6/7 Cable (TRANSMITTER ONLY). Model: AT-VGA100-S

The Atlona passive VGA transmitter unit allows sending a perfect video signal over 1 x CAT5/6/7 cable up to the distance of 330ft with resolutions up to 1280x1024. These extenders can be mixed and matched with each other. The wall plate transmitter can be matched with “box” receiver and the other way around and of course, the wall plate transmitter will perfectly work with wall plate receiver and “box” transmitter with “box” receiver.

Plug and Play, no drivers or software needed, user will not even notice the difference when using an extender versus a direct connection. The extenders require no external power.

Note: The AT-VGA100-S is only a transmitter unit, the receiver is required (AT-WPVGA-R or AT-VGA100R)

Combinations are below:

a. AT-WPVGA-S + AT-WPVGA-R c. AT-WPVGA-S + AT-VGA100-R
b. AT-VGA100-S + AT-VGA100-R d. AT-VGA100-S + AT-WPVGA-R

Applications:

The VGA Extenders are a great solution for many different applications, e.g., classroom, office environment, data-center, training room and many others where the computer must be placed further away from the users display.

Features:

  • Extend signals up to 330ft away from the computer on a single low-cost Cat5, 6 or 7 cables.
  • No power supplies are needed
  • Perfect for extending VGA signal further away than standard cables may allows.
  • Wall plate transmitter is compatible with “box” receiver and other way around.
  • Resolution support up to 1280x1024
  • Plug and Play, no drivers or software needed
  • Any computer is compatible, no limitations

Technical Specifications:

  • Input: HD15 female
  • Output: RJ45 female
  • Supported Resolutions: 800x600, 1024x768, 1280x768 and 1280x1024
  • Transmission Distance: up to 330ft

Max. Distance via CAT5 Cable:

  • 640x480 pixels (15MHz) – 430ft
  • 800x600 pixels (30MHz) – 320ft
  • 1024x768 pixels (60MHz) – 250ft
  • 1280x1024 pixels (100MHz) – 200ft

Warranty: 3 years

$76.95
 
Same Day Shipping
On Orders Placed in the Next
5 Hours 44 Minutes
$76.95

AT-WPVGA-R VGA Wall Plate Receiver Compatible With Wall Plate (WPVGA-S) & Metal Box Style (VGA100-S) Transmitters (Passive)

Atlona Passive VGA Wall Plate Extender up to 330ft over 1 x CAT5/6/7 Cable (RECEIVER ONLY). Model: AT-WPVGA-R

The Atlona passive VGA wall plate receiver unit allows sending a perfect video signal over 1 x CAT5/6/7 cable up to the distance of 330ft with resolutions up to 1280x1024. These extenders can be mixed and matched with each other. The wall plate transmitter can be matched with “box” receiver and the other way around and of course, the wall plate transmitter will perfectly work with wall plate receiver and “box” transmitter with “box” receiver.

Plug and Play, no drivers or software needed, user will not even notice the difference when using an extender versus a direct connection. The extenders require no external power.

Note: The AT-WPVGA-R is only a receiver unit, the transmitter is required (AT-WPVGA-S or AT-VGA100S)

Combinations are below:

a. AT-WPVGA-S + AT-WPVGA-R c. AT-WPVGA-S + AT-VGA100-R
b. AT-VGA100-S + AT-VGA100-R d. AT-VGA100-S + AT-WPVGA-R

Applications:

The VGA Extenders are a great solution for many different applications, e.g., classroom, office environment, data-center, training room and many others where the computer must be placed further away from the users display.

Features:

  • Extend signals up to 330ft away from the computer on a single low-cost Cat5, 6 or 7 cables.
  • No power supplies are needed
  • Perfect for extending VGA signal further away than standard cables may allows.
  • Wall plate transmitter is compatible with “box” receiver and other way around.
  • Resolution support up to 1280x1024
  • Plug and Play, no drivers or software needed
  • Any computer is compatible, no limitations

Technical Specifications:

  • Input: RJ45 female
  • Output: HD15 female
  • Supported Resolutions: 800x600, 1024x768, 1280x768 and 1280x1024
  • Transmission Distance: up to 330ft
  • Dimensions: Single Gang

Max. Distance via CAT5 Cable:

  • 640x480 pixels (15MHz) – 430ft
  • 800x600 pixels (30MHz) – 320ft
  • 1024x768 pixels (60MHz) – 250ft
  • 1280x1024 pixels (100MHz) – 200ft

Warranty: 3 years

$76.95
 
Same Day Shipping
On Orders Placed in the Next
5 Hours 44 Minutes
$76.95

AT-WPVGA-S VGA Wall Plate Transmitter Compatible With Wall Plate (WPVGA-R) & Metal Box Style (VGA100-R) Receivers (Passive)

Atlona Passive VGA Wall Plate Extender up to 330ft over 1 x CAT5/6/7 Cable (TRANSMITTER ONLY). Model: AT-WPVGA-S

The Atlona passive VGA wall plate transmitter unit allows sending a perfect video signal over 1 x CAT5/6/7 cable up to the distance of 330ft with resolutions up to 1280x1024. These extenders can be mixed and matched with each other. The wall plate transmitter can be matched with “box” receiver and the other way around and of course, the wall plate transmitter will perfectly work with wall plate receiver and “box” transmitter with “box” receiver.

Plug and Play, no drivers or software needed, user will not even notice the difference when using an extender versus a direct connection. The extenders require no external power.

Note: The AT-WPVGA-S is only a transmitter unit, the receiver is required (AT-WPVGA-R or AT-VGA100R)

Combinations are below:

a. AT-WPVGA-S + AT-WPVGA-R c. AT-WPVGA-S + AT-VGA100-R
b. AT-VGA100-S + AT-VGA100-R d. AT-VGA100-S + AT-WPVGA-R

Applications:

The VGA Extenders are a great solution for many different applications, e.g., classroom, office environment, data-center, training room and many others where the computer must be placed further away from the users display.

Features:

  • Extend signals up to 330ft away from the computer on a single low-cost Cat5, 6 or 7 cables.
  • No power supplies are needed
  • Perfect for extending VGA signal further away than standard cables may allows.
  • Wall plate transmitter is compatible with “box” receiver and other way around.
  • Resolution support up to 1280x1024
  • Plug and Play, no drivers or software needed
  • Any computer is compatible, no limitations

Technical Specifications:

  • Input: HD15 female
  • Output: RJ45 female
  • Supported Resolutions: 800x600, 1024x768, 1280x768 and 1280x1024
  • Transmission Distance: up to 330ft
  • Dimensions: Single Gang

Max. Distance via CAT5 Cable:

  • 640x480 pixels (15MHz) – 430ft
  • 800x600 pixels (30MHz) – 320ft
  • 1024x768 pixels (60MHz) – 250ft
  • 1280x1024 pixels (100MHz) – 200ft

Warranty: 3 years

$76.95
 
Same Day Shipping
On Orders Placed in the Next
5 Hours 44 Minutes
$76.95

AT-RGB45SR Atlona VGA with Stereo Audio Extender up to 150ft (supports EDID)

Atlona VGA with Stereo Audio Extender Kit over single CAT5/6/7 with DDC Support. Model: AT-RGB45SR

The Atlona AT-RGB45SR (transmitter and Receiver) Extender units with stereo Audio allow users to extend Video signal with resolutions VGA~WUXGA (640x480~1920x1200) up to 150ft (45m). The RGB45SR is designed to extender both audio and video on a single low cost CAT5, 6 or 7 Cable. The extenders are featured with DDC (EDID) support, which is needed for video cards to know what the display capabilities are. The AT-RGB45SR extenders transfer signal in real time with less than 2ms of delay.

The AT-RGB45SR is capable of sending Component Video signal via VGA/Component adapters.

Note: OPTIONALPOWER OVER USB SOLUTION NOW AVAILABLE FOR THIS ITEM!! AT-PWUSB

Applications:

  • Office Workstation: PC to Monitor Extension allows extending video and audio up to 150ft away from
    the workstation.
  • Conference Room or Boardroom: PC to Projector Extension allows extending video signal over long
    distance utilizing existing CAT5, 6 or 7 cables. This solution is perfect for Schools and Universities.
  • Computer/Monitor Testing: Since the AT-RGB45SR are capable of supporting DDC (EDID), it would
    make it easy for QA department to test Displays/computers which are further away from the testing
    area.
  • Airport/Train Station: The RGB45SR’s are based on low power chip-set which is designed to work for
    many years without a need to reboot/reset.

Features:

  • Transmits real time Video and Audio up to 150ft
  • Supports extremely high resolutions up to WUXGA (1920x1200)
  • Supports DDC (EDID), allows video card to know what the display capabilities are.
  • Based on the low power chip-set, therefore can last many years without reboot/reset
  • Designed to transmit both Video and Audio on low cost CAT5/6/7 Cable
  • Support Hot Plug Detect

Specifications:

  • Input Port Transmitter 1 x VGA, 1 x 1/8-inch (3.5mm) jack
  • Input Port Receiver 1 x RJ45
  • Output Port Transmitter 1 x RJ45
  • Output Port Receiver 1 x VGA, 1 x 1/8-inch (3.5mm) jack
  • Distance: 130ft CAT5e, 150ft CAT6 and 190ft CAT7
  • Support resolution 640x480@60/72/75/85, 720x400@70, 800x600@56/60/72/75/85, 1024x768@60/70/75,1280x720@60, 1280x768@60, 1280x800@60RB/60,1280x960@60,1280x1024@60/75, 1366x768@60RB/60, 1440x900@60RB/60/75, 1680x1050@60, 1600x1200@60, 1920x1080@60p,1920x1200@60RB
  • Power: 5V each module
  • Dimensions (inch) 3.1(W) x 3.58(D) x 1.18(H)
  • Power Supply 2x5V DC / 2.6A (100~240V)
  • Weight (lb) 0.5 each unit

Package Includes:

  • AT-RGB45SR (transmitter and Receiver are included)
  • 5V DC power supply (Universal 110/240v) x 2
  • Operation Manual

Warranty:

  • 3 years parts and labor
$296.86
 
Same Day Shipping
On Orders Placed in the Next
5 Hours 44 Minutes
$296.86

AT-RGBF30S-IR VGA/RGB with Bi-directional (RS232, Audio) and IR over multi mode fiber 1200ft (TRANSMITTER ONLY)

Atlona VGA/Component, RS232, IR and Audio Transmitter module over a single Multi Mode Fiber. Model: AT-RGBF30S-IR


The Atlona AT-RGBF30S-IR is a VGA or Component Video with RS232, IR and Audio receiver module with VGA/Component Video, RS232, IR and Audio female inputs and a single fiber optics output (multi-mode). The AT-RGBF30S-IR is designed to work with multiple transmitter modules:

  • AT-RGBF30R-IR – Box Style Receiver module with VGA/Component, RS232, IR and AUX Audio outputs.
  • AT-HDF30R-IR – Box Style HDMI Receiver module with HDMI, RS232, IR and Audio outputs
  • AT-DVIF30R-IR - Box Style DVI Receiver module with DVI, RS232, IR and Audio outputs

Features:

  • Extra Long Distance Extension up to 1200ft @1080p or 1920x1200, 1500ft @ 1600x1200 and 4000ft @ 1280x1024 
  • Format Converter built it to allow compatibility with Component, VGA, DVI and HDMI Receiver modules.
  • VGA or Component Video Support. If component is used the VGA to Component Breakout Cable is required
  • DDC Support
  • High Resolution Video, Audio, DDC, RS232, IR and AUX Audio can be handled through a single fiber cable
  • RS232 Compatible
  • IR pass through from the receiver module to the transmitter module
  • UL Class A Certified, required by high class government and medical installations
  • Built in Equalizer, allows user to use modules in between switchers/splitters and other equipment of that sort
  • Perfect for Commercial, Government and medical Installations or for high-end residential.
  • Made in USA

Technical Specifications:

  • Resolution Support: up to 1080p or 1920x1200
  • Built-In Format Converter allows compatibility with Component, VGA, DVI and HDMI receivers.
  • DDC:  Fully Supports
  • RGB Connector: HD15 (adaptable to Component Video)
  • RS232 Connector: harness style
  • AUX Audio connector: harness style
  • IR Connector: 3.5mm jack to be used with IR emitters up to 38kHz
  • Fiber Connector: Single Multi-Mode SC style
  • Power:  5V/1A
  • Weight (LB): 0.45

Package Includes:

  • 1 x AT-RGBF30S-IR
  • 1 x Instructions Manual
  • Harness Style Adapter for RS232 and Audio
  • 1 x 5V/1A Power Supply

 
Warranty:
3 years parts and labor

$1,506.28
 
Same Day Shipping
On Orders Placed in the Next
5 Hours 44 Minutes
$1,506.28

AT-AVGA-SR Atlona VGA with Stereo Audio Extender Wall Plate Kit up to 100ft

Atlona Powerless VGA with Stereo Audio Extenders over Cat5/6 up to 100ft. Model: AT-AVGA-SR

The Atlona AT-AVGA-SR (Sender and Receiver) VGA Extender Wall Plate Kit with stereo audio allow users to extend VGA and stereo audio signal great distances. Using a dual, cost effective Cat-5 or Cat-6 cables, these units extend signal at distances up 125ft with no signal degradation and high resolutions up to 1280x1024. Both transmitter and receiver units are completely Powerless.

Connection: The sender unit (AT-AVGA-S) is connected to the signal source and is then connected to the receiver unit (AT-AVGA-R) via 2 x Cat-5 or Cat-6 Cables. The receiver unit is then connected to the desired computer displays.

Key Features:

  • This unit is intended for computer displays only
  • Extends VGA video and stereo audio signal up to 100ft away using two CAT5 cables.
  • Both Transmitter and Receiver units are Powerless
  • High Resolutions up to 1280x1024
  • Metal enclosures
  • Single Gang Wall plate style
  • Decora Style

Technical Specifications:

  • VGA In/Out Connector: 1x HD-15 Female
  • Audio In/Out Connector: 1x 3.5mm Stereo Jack
  • Twisted Pair Cable Connectors: 2x RJ-45
  • Max. Resolution: 1280x1024 @ 60Hz
  • Cable Distance: 125ft Max
  • Housing: Metal
  • Size: Single Gang
  • Wall Plate Style: Decora
  • Shipping Weight: 2.6LB

Package Includes:

  • 1 x AT-AVGA-S Sender Unit
  • 1 x AT-AVGA-R Receiver Unit
  • 1 x user's manual
  • 1 x VGA 4ft cable (Male to Male)
  • 1 x Audio 4ft cable
  • 2 x White Decora Plates
  • 4 x Screws
*THIS UNIT DOES NOT WORK WITH TVﾒS, PC MONITORS ONLY!

Warranty: 3 years


$186.91
 
Same Day Shipping
On Orders Placed in the Next
5 Hours 44 Minutes
$186.91

AT-VGA-RS300SRS VGA, Audio & RS-232 over CAT5 extender

Atlona VGA with Stereo Audio RS232 and IR Extender Over SINGLE CAT5/6 (Up to 1000ft). Model: AT-VGA-RS300SRS

The Atlona AT-VGA300SRS is a twisted pair transmitter and receiver modules for computer video graphics (VGA up to 1920x1200), stereo/digital audio, RS-232 and IR data signals. The transmitter unit converts VGA, Audio, RS-232 and IR inputs to a twisted pair signal (Cat5/6/7), and the receiver module converts the twisted pair signal back into the VGA, Audio, RS-232 and IR data signals. The AT-VGA300SRS is capable of extending signals up to 1000ft and still maintaining very high video resolutions. The sender unit has a local VGA and Audio Loop-Out for a local display to be active without a need of a separate splitter. The extenders are featured built-in EQ and Gain control to compensate for lower quality cable or long distance.

Features:

  • Transmits VGA, Stereo/Digital Audio, RS232 and IR long distances up to 1000ft
  • Transmitter unit is featuring VGA and Audio local outputs for a local display to be active without a need of a separate splitter
  • Designed to work on low cost Cat5/6/7 Cables
  • High Resolution support up to 1920x1200 or 1080p
  • Unique Technology is used to be able to transmit high resolution VGA (WUXGA), Audio, RS232 and IR on a Single Cable
  • Bi-Directional RS232
  • Both Transmitter and Receiver units are shielded for environments with a lot of interference
  • Wall Mountable, brackets are included

Technical Specifications:

  • Transmitter Input ports: 1 x VGA female; 1 x RS-232 (9-pin); 1 x Analog Stereo Audio(3.5mm jack); 1 x Digital Coaxial (RCA jack); 1 x IR input (3.5mm jack)
  • Transmitter Output ports: 1 x CAT5/6/7 (RJ45); Local VGA w/Audio outputs
  • Receiver Input ports: 1 x CAT5/6/7 (RJ45)
  • Receiver Output ports: 1 x VGA female; 1 x RS-232 (9-pin); 1 x Analog Stereo Audio(3.5mm jack); 1 x Digital Coaxial (RCA jack); 1 x IR input (3.5mm jack)
  • HDTV Resolutions: 480i/p 60, 576p 50, 720P 50/60, 1080i 50/60Hz, 1080p 50/60Hz
  • Computer Resolutions: up to 1920 x 1200
  • Video Bandwidth: 350Mhz
  • Power Supply: 5V / 2.6A (Universal) for both Transmitter and Receiver units
  • Dimensions (inch): 4.8 x 33.7 x 1 (receiver/transmitter are the same size)
  • Net Weight each unit: 1.2LB each
  • Gross Package Weight: 4.3LB

Package Includes:

  • 1 x Transmitter Unit
  • 1 x Receiver Unit
  • 2 x Power Supplies (universal 110/240v)
  • 1 x Manual
  • 1 x IR Emitter and Receiver

Warranty:

  • 3 years parts and labor
$483.77
 
Same Day Shipping
On Orders Placed in the Next
5 Hours 44 Minutes
$483.77

AT-4VGA300SL 1 x 5 VGA & Stereo Audio CAT5 Extender ( sender unit )

Atlona VGA with Stereo Audio CAT5 Extender with 4xCAT5 and 1xVGA loop-outs (sender unit). Model: AT-4VGA300SL

Atlona AT-4VGA300SL designed to transfer VGA & Stereo Audio signal over cost effective CAT5 cable.This AV Extender is the smart, fast and cost-effective solution, eliminating costly and bulky VGA and Audio cables for the most efficient way to move multimedia content from player to display.

AT-4VGA300SL ( sender unit ) can be used with AT-VGA300RL ( receiver unit ) which must be purchased separatly. AT-4VGA300SL (sender unit) can also be combined with AT-2VGA300SL ( sender unit ) to increase amount of outputs.

Features:

• Extends VGA and stereo audio over one UTP CAT5 cable.
• Needs to be used in pair with AT-VGA300RL ( receiver unit )
• Supports analog stereo audio.
• Supports resolutions up to 1600x1200 @85Hz.
• Long range transmission up to 1000ft (300m)
• 1 VGA loop output for local monitor, plus 4 x CAT5 RJ45 output for remote side.
• Built in equalization and gain adjustment on receiver side.
• Receiver unit can be daisy chained to another AT-VGA300RL receiver to extended working range
over 300 meters and multiple displays.
• Application for airports, train & bus stations, window display, trades shows and exhibitions.


Technical Specifications:
-Resolution: Up to 1600 x 1200
-Video Bandwidth: Sender 750MHz / Receiver 350MHz-3db
-Video Input / Output: RGB Analog, 75Ω, 0.7Vp-p
-Sync Input / Output: H/V Separated, 5V TTL
-Horizontal Frequency: 30-95 KHz
-Vertical Frequency: 50-180 Hz
-VGA Connector: 15-pin Mini D-Sub (High Density)
-Analog Audio Input / Output: 10KΩ, 3Vp-p (Max)
-Analog Audio Bandwidth: 20-20KHz-3dB
-Analog Audio Connector: 3.5mm Stereo Phone jack
-Link Connector: 4 x RJ-45
-Max Distance: Up to 1000 ft. (300M)
-Power Supply: 5V DC 2000mA Regulated (External)
-Power Consumption: 500mA (Max)
-Dimensions (mm): 125x 95 x 30
-Weight (g): 280

Package Contents:

  • AT-4VGA300SL (sender unit only) x 1
  • 5VDC Power Supply Adaptor (110-240v) x 1
  • VGA ( male/male ) cable 3ft x 1
  • 3.5mm stereo audio cable 3ft x 1
  • Operation Manual x 1
$219.89
 
Same Day Shipping
On Orders Placed in the Next
5 Hours 44 Minutes
$219.89